Glossary entry (derived from question below)
Jan 25, 2009 09:52
15 yrs ago
2 viewers *
английский term
Works in: английский => русский
SI/min
английский => русский
Техника
Техника: Промышленность
Filters
Подскажите, пожалуйста, что это за единицы "SI/min". Не понятно, какая буква написана после S - I или l.
Cartridges maintain integrity after 100 hours of continuous steaming at 135°C. Typical Air Flow Rates At 0 bar outlet: 600 SI/min at a differential pressure of 100 mbar.
At 1 bar inlet: 600 Sl/min at a differential pressure of 75 mbar.
Спасибо
Cartridges maintain integrity after 100 hours of continuous steaming at 135°C. Typical Air Flow Rates At 0 bar outlet: 600 SI/min at a differential pressure of 100 mbar.
At 1 bar inlet: 600 Sl/min at a differential pressure of 75 mbar.
Спасибо
Proposed translations
(русский)
| 2 +5 | ст. л./мин |
2rush
|
| 1 | похоже на "... сотен литров в минуту" |
Ol_Besh
|
Proposed translations
+5
14 мин
английский term (edited):
sl/min
Selected
ст. л./мин
"Question: What are the units used for Flow Rates ?
Units for flow rate is usually displayed in terms of volume. The MFC converts mass flow into volume flow at 0 degrees C and 1 atm (101.32 kPa) to indicate flow per minute in either of the following units :
Standard centimetre cube per minute (sccm)
Standard litre per minute (slm)
1slm = 1000 sccm "
http://www.qualiflow.com/us/s_faq.html
Units for flow rate is usually displayed in terms of volume. The MFC converts mass flow into volume flow at 0 degrees C and 1 atm (101.32 kPa) to indicate flow per minute in either of the following units :
Standard centimetre cube per minute (sccm)
Standard litre per minute (slm)
1slm = 1000 sccm "
http://www.qualiflow.com/us/s_faq.html
Reference:
4 KudoZ points awarded for this answer.
Comment: "Спасибо!"
8 мин
похоже на "... сотен литров в минуту"
/
Something went wrong...