Glossary entry (derived from question below)
English term or phrase:
die and kiss cutting capabilities
Chinese translation:
冲(/模)切和吻切能力
Added to glossary by
Mark Xiang
Jan 19, 2005 05:57
19 yrs ago
English term
die and kiss cutting capabilities
English to Chinese
Other
Electronics / Elect Eng
Moving to slide 74, we get into some of our manufacturing capabilities that Emerson & Cuming Microwave Products has. First of which, we have die and kiss cutting capabilities. We also have machining and water jet cutting technologies. We can do custom fabrications, custom moldings and MIP ore mold-in-place.
TIA
TIA
Proposed translations
(Chinese)
4 | 模切和吻切加工能力 | Mark Xiang |
3 | kiss-cutting 吻切? | Yongmei Liu |
3 | FYI | XiaoRan |
Proposed translations
3 hrs
Selected
模切和吻切加工能力
模切(die cutting)
http://www.cgan.net/book/BOOKS/PRINT/printing/8z/3j2.htm
公司先后从国内外引进了一批先进的加工检测设备,现有硫化机20台、立卧式注塑机、精密冲床、开炼机及吻切机、研磨机等专用机床和Profile Projector, Drop Gauge等检测设备。
http://wxhaibo.5322.cn/default.asp
http://www.cgan.net/book/BOOKS/PRINT/printing/8z/3j2.htm
公司先后从国内外引进了一批先进的加工检测设备,现有硫化机20台、立卧式注塑机、精密冲床、开炼机及吻切机、研磨机等专用机床和Profile Projector, Drop Gauge等检测设备。
http://wxhaibo.5322.cn/default.asp
3 KudoZ points awarded for this answer.
Comment: "thanks a lot!"
51 mins
kiss-cutting 吻切?
多种多样形状如方形,C形,D形,P形,U型,钟型,刀型,J型及其它任何复杂形状的衬垫可以满足您多种需求,外形整体规则美观,便于装配使用,此外还可以进行半切,斜切,吻切等特种加工。(We can serve you with Rectangle shape, C shape, D shape, P shape, U shape, Bell Shape, Knife Shape, J shape and other custom shapes per custom request. Most of these profiles can be cut into specified lengths, angle cut or kiss cut on release liner.Overall they look good and very easy for
http://216.239.57.104/search?q=cache:96rxQkcsMl4J:www.newink...
http://216.239.57.104/search?q=cache:96rxQkcsMl4J:www.newink...
1 hr
FYI
薄模切割/刀模切割
http://www.sign-pacrim.com/line-htm/cut-aristo.htm
轻触切/模切
http://www.cntranslators.com/mtsbbs/post.asp?method=Reply&TO...
--------------------------------------------------
Note added at 1 hr 16 mins (2005-01-19 07:14:37 GMT)
--------------------------------------------------
“薄模”应改为“薄膜”。请搜索“薄膜切割”或“刀模切割”,均可搜到很多网页.
http://www.sign-pacrim.com/line-htm/cut-aristo.htm
轻触切/模切
http://www.cntranslators.com/mtsbbs/post.asp?method=Reply&TO...
--------------------------------------------------
Note added at 1 hr 16 mins (2005-01-19 07:14:37 GMT)
--------------------------------------------------
“薄模”应改为“薄膜”。请搜索“薄膜切割”或“刀模切割”,均可搜到很多网页.
Discussion